Action Army

Action Army AAP01 CNC Magwell Genuine upgrade parts for your AAP01 Supplied with 2 x Grub Screws for mounting Don't forget - if you aren't confident in carrying out your own weapon servicing, repairs or upgrades, we have experienced...

£69.95

Action Army

Action Army AAP01 Competition Charging Handle Extended charging handle Includes extended fire selector switch For Action Army AAP-01 Assassin GBB Don't forget - if you aren't confident in carrying out your own weapon servicing, repairs or upgrades, we have...

£79.95

Action Army

Action Army AAP01 Folding Stock Official folding stock for the extremely customisable AAP01 GBB Pistol by Action Army Don't forget - if you aren't confident in carrying out your own weapon servicing, repairs or upgrades, we have experienced airsoft...

£57.95

Action Army

Action Army Ares AS-01 Striker Upgraded Smart Hop-Up Chamber This AS01 Hop-Up chamber uses a new and innovative system, that delivers extremely precise adjustment of the pressure placed upon the hop-up bucking. Key Features: Full CNC Aluminium Construction Easy...

£59.95

Action Army

Action Army L96 Upgraded Smart Hop-Up Chamber This L96 Hop-Up chamber uses a new and innovative system, that delivers extremely precise adjustment of the pressure placed upon the hop-up bucking. Key Features: Full CNC Aluminium Construction Easy adjustment of...

£59.95

Action Army

Action Army VSR 10 Upgraded Smart Hop-Up Chamber This VSR10 Hop-Up chamber uses a new and innovative system, that delivers extremely precise adjustment of the pressure placed upon the hop-up bucking. Key Features: Full CNC Aluminium Construction Easy adjustment...

£59.95

ASG

ASG Infinity CNC U-35000 Long Axle Motor This long shaft INFINITY motor is rated to run at approx. 35,000 rpm. We recommend our INFINTY motors in combination with our ULTIMATE Mil-Spec upgrade springs in the power range of M95-M115...

£89.95

Balystik

LOW PRESSURE REGULATOR (WITHOUT AIR LINE) Low pressure regulator for HPA gearbox and Gas to Air conversion. HPA throttle regulator Polarstar, Wolverine, Valken gearbox Low pressure from 0 to 150 psi. Standards psi Attention sold without assembly line. Adaptable...

£84.95

BO Manufacture

Bo Manufacture 48ci / 0.8L Tank and 3000 PSI Gauge Please note that this tank is supplied empty! Couriers will not transport pressurised tanks! Light yet durable, the new Bo Manufacture 48 cubic inch, 3000psi compressed air tank delivers...

£69.95

CowCow

Cow Cow 3L TM Hi-Capa Hop Up Chamber Cow Cow 3L HopUp Chamber is constructed from CNC machined aluminium 7075. Its lightweight design and redesigned structure can provide extra support to the lower part of the chamber. 3 “L”...

£64.95

CowCow

Cow Cow AAP-01 CNC Magwell - Black Key Features: Aluminium 6061 material with CNC machined Maximum funnel increases the speed of reloads A curved bottom magazine profile corrects for both planar and rotational insertion errors Available in Silver, Black,...

£50.95

CowCow

Cow Cow AAP-01 Stainless Steel Hammer Set Key Features: Precision CNC machined Stainless Steel MAF Polishing Technology for super smooth operation Durable construction prevents warping under hard use Hammer set including hammer, sear, firing pin, rotor and rotor spring...

£64.95

CowCow

Cow Cow AAP-01 Ultra Lightweight Blowback Unit Highlighted features 7075 Aluminium material with CNC machined Ultra lightweight design Durable construction prevents flexing and warping under hard use Provide stable and smooth blowback cycling For Action Army AAP01 **Important Notice**...

£79.95

CowCow

Cow Cow AAP-01 Ultra Lightweight Blowback Unit Highlighted features 7075 Aluminium material with CNC machined Ultra lightweight design Durable construction prevents flexing and warping under hard use Provide stable and smooth blowback cycling For Action Army AAP01 **Important Notice**...

£79.95

CowCow

Cow Cow AAP-01 Ultra Lightweight Blowback Unit Highlighted features 7075 Aluminium material with CNC machined Ultra lightweight design Durable construction prevents flexing and warping under hard use Provide stable and smooth blowback cycling For Action Army AAP01 **Important Notice**...

£79.95

CowCow

Cow Cow B01 Dynamic Blowback Housing – for TM Hi-Capa/1911 B01 Blowback Housing is precision CNC machined from 7075 aluminium for ultimate durability and quality. Weighing in at just 18 grams, this blowback housing will improve the cycling action...

£59.95

CowCow

Cow Cow B02 Dynamic Blowback Housing (Piston Head Ver.) - Silver for TM Hi-Capa/1911 B02 Blowback Housing is precision CNC machined from 7075 aluminium for ultimate durability and quality. Weighing in at just 18 grams, this blowback housing will...

£64.95

CowCow

Cow Cow High Flow Loading Nozzle for TM Hi-Capa/1911 CCT High Flow Loading Nozzle is CNC machined with 7075 Aluminum and keep it in ultra lightweight as 8 grams. It offers superior durability and consistency over standard polymer nozzles....

£69.95

CowCow

Cow Cow Match Grade SS Hammer - Black for TM Hi-Capa/1911 Cow Cow Hi-Capa Match Grade Stainless Steel Hammer – Silver Key Features: CNC machined stainless steel construction Drop in upgrade component Titanium Nitride (TiN) treated finish for greatly...

£64.95

CowCow

Cow Cow Match Grade SS Hammer - Silver for TM Hi-Capa/1911 Cow Cow Hi-Capa Match Grade Stainless Steel Hammer – Silver Key Features: CNC machined stainless steel construction Drop in upgrade component Titanium Nitride (TiN) treated finish for greatly...

£59.95

CowCow

Cow Cow TM G17 Gen 4 Hop Up Chamber This is a Glock 17 Gen 4 Hop Up Chamber, by Cow Cow, for use in Gas Blowback Airsoft Pistols. Features: Aluminium 7075 material with CNC machined Ultra-lightweight design Enhancing...

£54.95

DYE

DYE LT 0.8L/48ci 3000psi Aluminium Air Tank with Reg Please note that this tank is supplied empty! Couriers will not transport pressurised tanks! Comes with 800-850psi fixed output pressure reg. Weight: 1,2 kg Pressure: 200 bar Length: 197 mm...

£64.95

E&C

E&C Complete Version 2 (V2) Rear Wired Gearbox This E&C Complete Version 2 (V2) Gearbox is in a rear wired configuration with a mini tamiya battery connector. The gearbox features a full metal piston, metal air nozzle, low resistance...

£64.95

Edge

EDGE Custom “HEXA” Aluminum Outer Barrel for Hi-CAPA 5.1 The newest addition from EDGE Customs! Wanting to fit a tracer or suppressor? Then look no further. This is a non-drop outer barrel allowing you to keep accuracy and consistency...

£69.95

G&G

G&G G2 ETU and Mosfet Wire Set This is designed by G&G for use in the new G2 gearbox, not for regular AEGs. It is a full wire set and MOSFET for upgrading and replacing your standard parts. Don't...

£54.95

Gate

Gate ASTER V2 Basic Edition (Rear Wired) ASTER Module - It includes ASTER with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest...

£94.95

Gate

Gate ASTER V2 SE + Quantum Trigger (Rear Wired) ASTER V2 SE raises the price-performance ratio including in the set the Quantum Trigger and new functions programmable via the trigger. Now, out-of-the-box, you can set sensitivity from ludicrous ‘touch’...

£89.95

Gate

Gate ASTER V3 SE Basic Module The ASTER is the younger brother of GATEs famous high-end TITAN ETU, designed to give you a tactical advantage at an attractive price. The 4th generation Control System will give you maximum reliability...

£89.95

HK Army

HK Army 0.8L/48ci 3000psi Aluminium Air Tank with Reg Please note that this tank is supplied empty! Couriers will not transport pressurised tanks! Comes with 800-850psi fixed output pressure reg. Weight: 1,2 kg Pressure: 200 bar Length: 197 mm...

£59.95

JG

JG Complete V2 Gearbox (Front Wired) Replacement complete version 2 gearbox for M4 series AEG. It fits into most brands as a drop in replacement, but may not fit all variations. *The FPS as standard is quite high (400fps)...

£69.95

Prometheus

These upgraded, 13:1 ratio gears by LayLax (Prometheus) give you a high-quality upgrade, resulting in a better semi-auto response, for use with any standard AEG V2 gearbox. This Prometheus gear set is widely compatible, designed for use in a...

£74.95

Prometheus

These upgraded, 18:1 ratio gears by LayLax (Prometheus) give you a high-quality upgrade, resulting in a better semi-auto response, for use with any standard AEG V2 gearbox. This Prometheus gear set is widely compatible, designed for use in a...

£79.95

Prometheus

LayLax Prometheus 20:1 Double Torque NGRS Gear Set Fits all Tokyo Marui next gen recoil airsoft guns Direct translation from Prometheus Like a real gun, the next generation electric gun series that produces a realistic recoil shock. Although that...

£99.95

Prometheus

Laylax Prometheus PSS10 303mm Barrel for VSR-10 G-Spec This upgrade barrel by Laylax/Prometheus is one of the highest quality upgrade barrels available on the market. This barrel offers an outstanding performance and has incredible tolerances. It measures 303mm in...

£69.95

Prometheus

This upgrade barrel by Laylax/Prometheus is one of the highest quality upgrade barrels available on the market. This barrel offers an outstanding performance and has incredible tolerances. It measures 430mm in length (making it perfect for VSR-10 snipers), and...

£54.95

Maple Leaf

Maple Leaf 1911 GBB Series 4.3" Chamber Set with 6.02 113mm inner Barrel & Autobot 60 This Maple Leaf Hop Up Chamber Assembly is great for various brands of 1911 including Tokyo Marui, WE, Raven, VFC, Stark Arms and...

£64.95

Maple Leaf

This upgraded inner barrel by Maple Leaf measures 590mm in length, and 6.02mm in diameter, and is constructed out of brass and metal alloy. This barrel provides a cushion of air around the BB after it leaves the barrel,...

£54.95

Maple Leaf

This upgraded inner barrel by Maple Leaf measures 640mm in length, and 6.02mm in diameter, and is constructed out of brass and metal alloy. This barrel provides a cushion of air around the BB after it leaves the barrel,...

£59.95

Maple Leaf

This is a drop-in kit that is pre-assembled, so it is super easy to fit. Literally all you need to do is place it inside your WE/TM/KJ branded Hi-Capa to instantly improve your pistols consistency and range. The included...

£64.95

Maxx

CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently with HPA PolarStar Engines on standard M4/M16 platform. The Hopup Chamber M4P unit is built with an aluminum Rotary Dial...

£89.95

Maxx

This CNC Aluminum Hop-up Chamber ME Pro (with BB Latching System) unit, by Maxx Model, is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series. The Hopup...

£59.95

Maxx

This CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) with UV LED Tracer unit is precisely made, by Maxx, to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG...

£92.95

Maxx

MAXX Model CNC Hopup Chamber ME - SPORT CNC This aluminium Hop-up Chamber ME Sport (with BB Catching System) unit is designed to improve accuracy and ensure consistent air seal for Tokyo Marui, Krytac, KWA and other M4/M16 Standard...

£54.95

Maxx

This CNC Aluminum Hopup Chamber ME Sport Tracer unit is precisely made, by Maxx, to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series. The Hopup Chamber ME unit has...

£86.95