Kombat UK Ranger Glasses - Black/Clear Lens

This eye protection conforms to CEE= EN166 standards and comes with inserts, allowing you to have prescription lenses fitted.

Description:

• EN166 Rated Eye Protection
• UV400 Protection
• Anti Scratch & Anti Fog
• Polymer Frame, Elastic Headband & Rubber Nose
  Gasket
• Includes Protective Sleeve / Bag
• EN166:2001
• Colour Display box with Window

**Low Energy Impact Rating (45m/s) **


Lens Marking
2C-1.2 KO 1 F EN166 K N F

2C - (FILTER RATING) UV Protection w/ good colour recognition
1.2 - (LENS SHADING) Clear
KO -  (Manufacturer) Kombat UK Ltd
1 - (Optical Class) Class 1
F - (Mechanical Resistance) Low Energy Impact Rating (45m/s)
EN166 -  EN166:2001 Standard
K - Scratch Resistance
N - Anti-Fog

**Please note the impact rating above. Its your responsibility to check these are suitable for  what you intend to use them for**

** These are NOT to be sold or advertised at a higher impact rating**

EN
MAINTENANCE OF EYE PROTECTOR
This eye protection should be stored away from direct sunlight and abrasive chemicals.
The lens should be cleaned with a soft cloth and water.
This eye protection can be disinfected with any common household disinfectant.
This eye protection should be inspected frequently and replace worn, pitted or damaged parts.

FRAME MARKING
The marking on the frame shows:
"Identification of the distributor/maker” "Number of the EN standard" “Fields of Use” "Symbol for Impact resistance (see below)" "Certification Mark"

Fields of Use
NONE - General use
3 - Liquid droplets or splashes
4 - Large dust particles > 5 μm
5 - Gases and small dust particles < 5 μm
8 - Short circuit electric arc
9 - Molten metal and hot solids

Impact Resistance (Mechanical Strength)
F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
A - High energy impact resists a 6mm, 0.86g ball at 190m/s
S – Increased strength
Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.

LENS MARKING
The lens is marked as follows:
“Lens filter type” “Lens scale number” “Identification of the distributor/maker” “Optical class” “Impact resistance (mechanical strength)” “Certification Mark” “Other marking”

Filter Type
2/2C - UV (2C doesn’t affect colour recognition)
4 – IR Filter
5/6 - Solar Filter
Lens Scale Number
2.1,2/3.1,2 – Indicates this eyewear is intended for use with UV filter (with or without
good colour recognition) up to a scale number of 2-1.2 or 3.1,2 (goggles only)
1.2 - Clear or Amber
1.4 - Blue or I/O Waterproof
1.7 - Minimises or I/O
2.5 - Grey or Revo
3.1 - Dark Grey or Mirror

Optical Class
1 – Indicates class 1 optical quality (High Quality)
2 – Indicates class 2 optical quality
Impact Resistance (Mechanical Strength)
F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
A - High energy impact resists a 6mm, 0.86g ball at 190m/s
S – Increased strength
Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.

Other Markings
K - Resistant to surface damage by fine particles
N - Resistant to fogging

To buy an airsoft weapon in the UK you must have a valid airsoft defence.

This is not a licence, it is basically just proof that you intend to buy an airsoft weapon for use in airsoft.

An airsoft defence could be a UKARA or membership with the British Airsoft Club, and various other forms of defence.

You can only obtain an airsoft defence once you are over the age of 18.

To get an airsoft defence the law is that you should play at least 3 games of airsoft, and that you must have been playing for at least two months.

You can still buy an airsoft gun without a defence, provided you are 18 or older. If you choose to do this we would, by law, two tone (paint in a bright colour) parts of your chosen weapon. This is because an airsoft gun is considered a RIF aka Realistic Imitation Firearm, because they are so close to the real steel, whereas when you paint parts of it in a bright colour it becomes an IF aka Imitation Firearm. The reason being that the bright colours make it look less realistic to the public, and therefor less likely to be mistaken as real, were it to be used for any other purpose than airsoft.

When you order a gun from us you will need to add your defence details in the comments section of the cart. If you do not have a defence you will need to write the colour that you wish to be used for two toning your airsoft weapon.

Here is what's stated in the VCRA (Violent Crime Reduction) Act:

For airsoft skirmishing, the Association of British Airsoft is putting in place arrangements to allow retailers to check that individual purchasers are members of a genuine skirmishing club or site. The key elements of these arrangements are:
1. new players must play at least 3 (three) times in a period of not less than two months before being offered membership
2. membership cards with a photograph and recognised format will be issued for production to retailers
3. A central database will be set up for retailers to cross-check a purchaser’s details
4. member’s entry on the database will be deleted if unused for 12 months.
The defence for airsoft skirmishing can apply to individual players because their purchase of realistic imitation firearms for this purpose is considered part of the “holding” of a skirmishing event.