Rebel Battery - 3000mAh Li-Ion 11.1V 10C Nunchuck - Mini Tamiya
£34.95
In stock
Rebel
SHARE THIS PRODUCT:
Rebel Battery - 3000mAh Li-Ion 11.1V 10C Nunchuck - Mini Tamiya
Type: Lithium-Ion
Voltage: 11.1v
Capacity: 3000 mAh
Connector:Mini Tamiya
Continuous Rate: 10 C at 24 A
Burst Rate: 20 C at 48 A
Configuration: Nunchuck
Dimensions: Stick 1: 22m x 133 mm, Stick 2: 22m x 67mm
JST-XH Balance Leads
High Quality Silicone Leads
WARNINGS
- Only use approved LiPo chargers and never use a NiMH or NiCd charger to charge LiPo
- Do not pierce the battery
- Do not disassemble the battery
- Do not short-circuit the battery terminals
- Do not connect the battery directly to an electrical outlet
- Do not strike or throw the battery against hard surfaces
- Do not immerse the battery in water or seawater
- Always disconnect the battery immediately after use, charging or discharging and keep the battery in a cool, dry environment during stand-by periods
- Do not use, throw or leave the battery near heat source such as fire or heater
- Do not dispose of the battery in fire or heat
- The battery should not be charged with more than a current of 1C (e.g. a 1200 mAh battery should be charged with 1.2 A (1200 mA)). Charging with higher currents can potentially damage battery cells or even lead to overheating or other serious failures
- Stop charging immediately if temperature exceeds 45°C
- Stop using battery if temperature exceeds 60°C - Never leave LiPo batteries charging unattended
- Always monitor the charging process of your LiPo batteries so that you can react immediately to any potential problems
- If your LiPo batteries start to balloon or swell up, discontinue charging/discharging/usage
- Before and after use of your LiPo batteries, inspect them to ensure that there is no physical damage or swelling as those are signs of imminent failure
- Read all instructions on the batteries, box & packaging before use.
- Never completely discharge your LiPo battery. Stop immediately when you register a drop in power or rate of fire