Specna Arms SA-K02 ONE™ Kestrel™ ETU Airsoft Rifle - Tan

Specna Arms SA-K02 ONE™ Kestrel™ ETU Airsoft Rifle - Tan


In stock

Specna Arms


Specna Arms SA-K02 ONE™ Kestrel™ ETU Airsoft Rifle - Tan

The Specna Arms SA-K02 ONE™ Kestrel ASG Carbine ETU

The Kestrel module V2 Basic ETU by Eshooter is an advanced ETU system characterised by ease of use, robustness and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overloads due to motor damage or battery drain.

Functions of the Kestrel system Basic:

-Pre-cocking programmable in 5 stages with piston position learning. 
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, feature protects the inside of the replica in the event of motor damage
-Battery Drain Protection. Battery Drain Protection. The motor vibrates, the blue LED illuminates five times to indicate battery discharge
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.

The Specna Arms SA-K02 ONE™ Kestrel airsoft gun ETU is a well-fitted and very well-made airsoft gun. The SA-K02 ONE™ combines well-known and well-liked features of the classic M4 with more modern designs such as double-sided manipulators and ergonomic trigger holster. The model is equipped with very good internal parts allowing for trouble-free operation and high-level performance in factory configuration or tuning.

Features of the replica:

- The body of the replica and the RIS front are made of anodised aluminium.
Functioning, double-sided Bolt-Catch.
- Double-sided fire mode switch.
Stainless steel screws, pins and tactical sling handle.
- Flask and pistol grip made of polymer plastic.
- Flask fitted with rubber foot with non-slip texture.
- Very good fit and balance.
Quick spring change system, so called Enter & Convert™ allowing you to quickly change the power of the replica in a matter of moments.
- Adaptation for use with LiPo and LiFe batteries
- External barrel ended with 14mm CCW thread.

In the interior of the replica you will find:

A set of reinforced steel gears
- Steel spring guide
- Lightweight, polymer piston
8mm ball bearings
- Steel cut-off lever
- Type 2 steel cylinder
- Lightweight polycarbonate plastic piston with steel teeth
- Sealed aluminium piston head
- Metal cylinder head
- Sealed metal nozzle
Rotational Hop Up chamber

To buy an airsoft weapon in the UK you must have a valid airsoft defence.

This is not a licence, it is basically just proof that you intend to buy an airsoft weapon for use in airsoft.

An airsoft defence could be a UKARA or membership with the British Airsoft Club, and various other forms of defence.

You can only obtain an airsoft defence once you are over the age of 18.

To get an airsoft defence the law is that you should play at least 3 games of airsoft, and that you must have been playing for at least two months.
You can still buy an airsoft gun without a defence, provided you are 18 or older. If you choose to do this we would, by law, two tone (paint in a bright colour) parts of your chosen weapon. This is because an airsoft gun is considered a RIF aka Realistic Imitation Firearm, because they are so close to the real steel, whereas when you paint parts of it in a bright colour it becomes an IF aka Imitation Firearm. The reason being that the bright colours make it look less realistic to the public, and therefor less likely to be mistaken as real, were it to be used for any other purpose than airsoft.

When you order a gun from us you will need to add your defence details in the comments section of the cart. If you do not have a defence you will need to write the colour that you wish to be used for two toning your airsoft weapon.

Here is what's stated in the VCRA (Violent Crime Reduction) Act:

For airsoft skirmishing, the Association of British Airsoft is putting in place arrangements to allow retailers to check that individual purchasers are members of a genuine skirmishing club or site. The key elements of these arrangements are:
1. new players must play at least 3 (three) times in a period of not less than two months before being offered membership
2. membership cards with a photograph and recognised format will be issued for production to retailers
3. A central database will be set up for retailers to cross-check a purchaser’s details
4. member’s entry on the database will be deleted if unused for 12 months.
The defence for airsoft skirmishing can apply to individual players because their purchase of realistic imitation firearms for this purpose is considered part of the “holding” of a skirmishing event.
Size Chart